Gallery logo: Your photos on your web site

 

Album info

Random image

Transformer Mania!! 1977 Camaro

  • I put some in my Ford Small block 351.  It is about the same displacement and stroke as a 350 chevy.  Sure they were cheaper and the short stroke arguement about not needing a forged piston was weighing heavy upon me.

    • I put some in my Ford Small block 351. It is about the same…
  • Then the skirt broke off one of the pistons on my new Ford 351.  Never again!!  Then there is the other arguement about used rods and our new ones.  Any questions.  That arguement went out with Model A Fords.  Especially with a stroker.

    • Then the skirt broke off one of the pistons on my new Ford 3…
  • When you go for more cubic inch displacement you will also need a custom crankshaft.  That can add money. Now we can still bore it out and make some extra cubic inches with a 400 chevy crank.  Hense Bad Ass 383 Chevy Small Block

    • When you go for more cubic inch displacement you will also n…
  • Now, just take a look at these happy forged pistons.  Not ready to crack cast units.  These pistons will run the distance and not fail.  Only other way to get them to fail is with poor machining.

    • Now, just take a look at these happy forged pistons. Not re…
  • Once you get your Stroker 383 together it all should rotate fine.  If you do not check this step you could end up with a broken camshaft.  Many of the motors we have made had to big a base circle on the cam and if fired would of gernaded.

    • Once you get your Stroker 383 together it all should rotate…
  • Then you have the fact that the Truck Motor is the only way to go for the Chevy Small Block.  Lets face it, make it stiffer, larger and more impervious to damage.  That way you can stomp on it and not worry.

    • Then you have the fact that the Truck Motor is the only way…
  • When we have performed our work it will look like this.  Just like the motor that came out but with hidden power.  Lots of hidden power.

    • When we have performed our work it will look like this. Jus…
  • The main offending item to eliminate is the stock cast iron not let the exhaust gas get out of the cylinder manifolds.  In the process you do not want to go with some cheap buck unit.

    • The main offending item to eliminate is the stock cast iron…
  • That is why we will custom weld up a set like this.  They are made specifically for the second gen cars.  They are perfect and clear everything.  They also are medium collector units.

    • That is why we will custom weld up a set like this. They ar…