Gallery logo: Your photos on your web site

 

Album info

  • Title: Bobs 389
  • Description: We ship them all over but this is the first one to Hawaii. Bob wants to keep his GOAT happy.
  • Owner: Gallery Administrator

Random image

Here is a shot from the back. You can see the High Rise Two Barrel Carburetor Base Plate Gaskets. In the 64 Tri Powers they had phenolic base plate spacers that cracked to hell and were often removed.

Bobs 389

  • Now I have to move on to the small details of the engine formula for sucess. I must admit that the small details are just as important as the overall assembly. They all work together.

    • Now I have to move on to the small details of the engine for…
    • Views: 677
    • By: Gallery Administrator

  • The motor is in fine shape. All the items are bolted up and fit correctly. Now it will be time to get the small items ready so that I can fire her up on the DYNO

    • The motor is in fine shape. All the items are bolted up and…
    • Views: 750
    • By: Gallery Administrator

  • I will take off this thermostat housing and paint it black. I realize that they were Pontiac Blue but they look better black. It will match the water pump and the balancer.

    • I will take off this thermostat housing and paint it black.…
    • Views: 800
    • By: Gallery Administrator

  • I like to install the 90 degree vacuum fitting onto the distributor to enable the hose to move better in relation to the Heater Hose outlet.

    • I like to install the 90 degree vacuum fitting onto the dist…
    • Views: 813
    • By: Gallery Administrator

  • I will have to install the oil galley plugs and the flywheel in short order. I like to check the distributor gear mesh before I put in the rear plug.

    • I will have to install the oil galley plugs and the flywheel…
    • Views: 708
    • By: Gallery Administrator

  • Not many people care about the distributor gear to camshaft gear mesh but I do. Ever try to change a drive gear on a camshaft. It ain't fun.

    • Not many people care about the distributor gear to camshaft…
    • Views: 824
    • By: Gallery Administrator

  • I will install an idiot light oil pressure housing sending unit. That will keep the oil in the engine and not in the crate. It will also give you the correct unit to fire it up with.

    • I will install an idiot light oil pressure housing sending u…
    • Views: 776
    • By: Gallery Administrator

  • I will have to get a 90 degree brass fitting to install onto your High Flow Fuel Pump. It will enable the fuel line to go straight up to the intake manifold and connect to the Carburetor with no unnecessary bends.

    • I will have to get a 90 degree brass fitting to install onto…
    • Views: 772
    • By: Gallery Administrator

  • I have taken the time to install the new PCV valve. I will also install new Vacuum hose to the PCV Valve and the fittings on the intake. I will need to see if you have the correct press in fitting on your motor as this intake did not have one

    • I have taken the time to install the new PCV valve. I will…
    • Views: 733
    • By: Gallery Administrator