Gallery logo: Your photos on your web site

 

Album info

Random image

Todd's 68 RS Camaro

  • Here is the Front end of the Leaf Spring correctly installed into the Front Hanger.  Notice that the bolt, washer and etc only go in one way.  Put it in the wrong way and stuff will not fit.

    • Here is the Front end of the Leaf Spring correctly installed…
  • These Front Leaf Spring Hangers are not interchangeable. They are Right and Left hand sides.  Now, once you get them Sandblasted they should be off for a good coating.  That makes the surface nice and smooth for the Polyurethane to ride upon.

    • These Front Leaf Spring Hangers are not interchangeable. The…
  • Here you can see the nice metal tubes installed into the Poly bushings.  These need to be there to torque the nut onto the bolt.  Ontop of that they will keep the bushings secure in the leaf springs.

    • Here you can see the nice metal tubes installed into the Pol…
  • These are the dead to the world springs.  On top of them being quite used and worn to hell they were installed with the custom huge high lift shakles.  Got to go.

    • These are the dead to the world springs. On top of them bei…
  • Todd's Camaro is actually a really nice survivor.  I like to work on Camaro's.  I used to be Camaro Dan.  Did all kinds of cars and became one of the best Restoration Artists for such.

    • Todd's Camaro is actually a really nice survivor. I li…
  • In this case I had decided to remove the High Lift Shackles and go back to stock.  It really is the only way to go and will return the value to the car.

    • In this case I had decided to remove the High Lift Shackles…
  • The main reason for this surgery is to repair the read end sag.  This is not good because the rear rims and tires can raise up into the fenderwell and damage the body.

    • The main reason for this surgery is to repair the read end s…
  • Out with the old and in with the new.  There are actually quite a few different rear leaf springs to utilize.  I use a set that is Custom Manufactured to our specs.  Now I would like to go into this but you would need to have us perform a rear leaf job...

    • Out with the old and in with the new. There are actually qu…
  • Now, just take a look at that happy rear differential.  Now it can live a nice life attached firmly into the rear end of the Camaro and not have to be thrown from side to side in nasty turns.

    • Now, just take a look at that happy rear differential. Now…