Gallery logo: Your photos on your web site

Kevins 67 Goat

  • You will find that all the items that we package into the crate are also packaged into a box. I feel that is the best way to protect the items and also keep the truckers from steeling them.

    • You will find that all the items that we package into the cr…
    • Views: 681
    • By: Gallery Administrator

  • This is the Throwout Fork Seal. You will utilize 3M Weatherstrip Adhesive to glue it into the Bellhousing so that it will be held in place. Just make sure that you have it properly positioned.

    • This is the Throwout Fork Seal. You will utilize 3M Weather…
    • Views: 565
    • By: Gallery Administrator

  • Remember that the short part goes towards the front of the car. Just like it looks in this picture. That way the Seal can Flex rearward when you push on the Clutch Pedal.

    • Remember that the short part goes towards the front of the c…
    • Views: 672
    • By: Gallery Administrator

  • We took all the steps necessary to make sure that the emblem in the box does not contact anything that could scratch it's surface. Now that is a absolute necessity. It sure looks great.

    • We took all the steps necessary to make sure that the emblem…
    • Views: 695
    • By: Gallery Administrator

  • We got to protect it all. In some of the boxes you will find that we packaged multiple parts together to conserve space. Not that we need it this time. Looks like this crate will work fine.

    • We got to protect it all. In some of the boxes you will fin…
    • Views: 557
    • By: Gallery Administrator

  • Here is the Factory Ram Air Pan for the Rochester Four Barrel Carburetor. This is a actual Ram Air Pan that worked with your 67 Goat. You can be assured that if you ever decide to convert if back the way it was you got it all.

    • Here is the Factory Ram Air Pan for the Rochester Four Barre…
    • Views: 573
    • By: Gallery Administrator

  • Even the Flywheel cover gets a protective covering with cardboard. It will keep it from damaging other items. In this case let us hope that the Semi Tractor does not go Four-Teen Wheeling.

    • Even the Flywheel cover gets a protective covering with card…
    • Views: 745
    • By: Gallery Administrator

  • Here is the Throw Out Fork. This goes into the Bellhousing. It works the Throw Out Bearing and releases the Pressure Plate and enables the clutch disk to spin freely. That is the key to shifting.

    • Here is the Throw Out Fork. This goes into the Bellhousing.…
    • Views: 744
    • By: Gallery Administrator

  • In this case I trial fitted it to an old Bellhousing to make sure that all lined up and worked as needed. It passes with flying colors. Then into the box it went. I check everything to make sure it is correct.

    • In this case I trial fitted it to an old Bellhousing to make…
    • Views: 585
    • By: Gallery Administrator