Gallery logo: Your photos on your web site

 

Album info

  • Title: Kevins 75 Camaro
  • Description: No description
  • Owner: Gallery Administrator

Random image

IM005974

Kevins 75 Camaro

  • Notice the motor mounts and the tower mounts for the frame. I even installed a thru bolt and washer to hold it all together. We will build wood supports to hook up to the mounts.

    • Notice the motor mounts and the tower mounts for the frame.…
    • Views: 908
    • By: Gallery Administrator

  • Oh, and the Polyurethane Rear Transmission Mount. It was a nice unit and has to go on only one way. Make sure the bump is towards the back of the car.

    • Oh, and the Polyurethane Rear Transmission Mount. It was a…
    • Views: 772
    • By: Gallery Administrator

  • All in all it is looking good. I am waiting for your choice in Yellow. I got the brackets and etc waiting for the coating. I will also make an attempt to paint the Balancer yellow.

    • All in all it is looking good. I am waiting for your choice…
    • Views: 788
    • By: Gallery Administrator

  • I will utilize this crossmember in the storage of the motor into the crate. We will take two 4 X 4 peices of wood and screw and glue them into the crate bottom.

    • I will utilize this crossmember in the storage of the motor…
    • Views: 861
    • By: Gallery Administrator

  • Then we will bolt up the tranny mount and put lag screws thru the outer mount holes into the 4 X 4 peices of wood that have been secured into the bottom of the crate. This will work like it was in a car.

    • Then we will bolt up the tranny mount and put lag screws thr…
    • Views: 833
    • By: Gallery Administrator

  • Here is the Turbo 400 Transmission Crossmember Bracket. It is not like the other Turbo 350 Crossmember. You will find that these are required to make up for the extra lenght of the Turbo 400

    • Here is the Turbo 400 Transmission Crossmember Bracket. It…
    • Views: 725
    • By: Gallery Administrator

  • In this case you should also install the Torque Converter Cover. It will not provide any significant reduction in road F.O.D. while in the crate but it will fit in better.

    • In this case you should also install the Torque Converter Co…
    • Views: 1015
    • By: Gallery Administrator

  • Not only will it fit better in the space that it was designed to be located but you will have much more space in the crate for additional items. You will never know when you need such.

    • Not only will it fit better in the space that it was designe…
    • Views: 738
    • By: Gallery Administrator

  • Here is the Transmission Torque Converter Cover. It is designed to eliminate the dust, rocks, and occasional rabbit from getting stuck between your motor and tranny.

    • Here is the Transmission Torque Converter Cover. It is desi…
    • Views: 775
    • By: Gallery Administrator