Gallery logo: Your photos on your web site

 

Album info

  • Title: Kevins 75 Camaro
  • Description: No description
  • Owner: Gallery Administrator

Random image

Here you can get a view of the Lower Full Lenght Windage Tray. The reason they call it a Tray is because it is. You need to add oil drain holes into the bottom of it for Strip use.

Kevins 75 Camaro

  • How long does it take to properly clean a differential? About Two Hours, with the correct equipment. Steam cabinet, Pressure Wash Cabinet, and then elbow grease supplier. Hard stuff to come by.

    • How long does it take to properly clean a differential? Abo…
    • Views: 945
    • By: Gallery Administrator

  • Even with the factory set pinion gear run in height some times I find myself having to alter that dimension slightly. Everyone makes mistakes and if the pattern does not match my version of perfection changes have to be made.

    • Even with the factory set pinion gear run in height some tim…
    • Views: 763
    • By: Gallery Administrator

  • Now the carrier goes in. It has to be installed once the pinion height has been correctly set and verified. I have custom tools made to ensure that accuracy down to the .0001.

    • Now the carrier goes in. It has to be installed once the pi…
    • Views: 895
    • By: Gallery Administrator

  • Then there is the preload on the side carrier bearings. Some people just do not realize that these tappered roller bearings run nearly twice as long if you have a slight say .001 to .002 preload on them.

    • Then there is the preload on the side carrier bearings. Som…
    • Views: 939
    • By: Gallery Administrator

  • You need to install the cover first and bolt it down without the gasket. Make sure that the Ring Gear does not hit the cover when you rotate the differential. If it does then you will definatley need the gasket for sure. Perhaps a different cover.

    • You need to install the cover first and bolt it down without…
    • Views: 928
    • By: Gallery Administrator

  • Every thing about the differential has to be just so. It is the starting place for the whole car to function and work. You do not want the car to go sideways down the road or the axles to fall out and ruin the new quarter panels.

    • Every thing about the differential has to be just so. It is…
    • Views: 905
    • By: Gallery Administrator

  • One other thing to do is to make sure that you only install it when the axles, backing plates, brakes, and etc are all installed. Oh and if you were checking the pinion rotation make sure you install the front seal.

    • One other thing to do is to make sure that you only install…
    • Views: 802
    • By: Gallery Administrator

  • All in all the whole process is coming together mighty fine. I am about to install the backing plates, axles and etc. It should be a fine rear differential.

    • All in all the whole process is coming together mighty fine.…
    • Views: 804
    • By: Gallery Administrator

  • I can definately guarantee that this will outlast the car. Say one hundred or so years later perhaps some Carnival owner will see this sitting in a field and take it to use on his Carnival ride. Ever see the differentials in the Zipper?

    • I can definately guarantee that this will outlast the car.…
    • Views: 781
    • By: Gallery Administrator