Gallery logo: Your photos on your web site

 

Album info

  • Title: Jerrys 60 Tri Power
  • Description: No description
  • Owner: Gallery Administrator

Random image

Jerrys 60 Tri Power

  • Here you have the Upper Air Horn of a Rochester Two Barrel Carburetor. You will notice that the appearance of the base metal is clean and spotless. You will also see that the Fuel Inlet is new and the Pintle Valve is of special design.

    • Here you have the Upper Air Horn of a Rochester Two Barrel C…
    • Views: 1169
    • By: Gallery Administrator

  • I take these Base Plates and they are completely disassembled and media blasted. Once we are done with this process they are assembled with new throttle shafts, Butterfly Retention Screws, Springs and Levers. Then I take special care in Fitting the P...

    • I take these Base Plates and they are completely disassemble…
    • Views: 1053
    • By: Gallery Administrator

  • Here you have the finished BasePlate Assembly. The Throttle plates have been fitted to the BasePlate Bores to eliminate Vacuum losses when closed. You will notice the New Baseplate Retention Screws.

    • Here you have the finished BasePlate Assembly. The Throttle…
    • Views: 975
    • By: Gallery Administrator

  • There are several different options for Fuel Floats. These little items have to exhibit leverage against the Pintle Valve in the Fuel Inlet to stop the incomming stream of fuel when not required.

    • There are several different options for Fuel Floats. These…
    • Views: 1050
    • By: Gallery Administrator

  • In every case the Rentention Hardware is replaced to Facilite proper operation. I must admit that I utilize a better quality Screw than the Original. If you want the old rust quickly screws then just let me know.

    • In every case the Rentention Hardware is replaced to Facilit…
    • Views: 988
    • By: Gallery Administrator

  • Here is the completed Baseplate assembly mounted upon the Carburetor Main Body. You will notice that even the throttle Blades have received Plating.

    • Here is the completed Baseplate assembly mounted upon the Ca…
    • Views: 1072
    • By: Gallery Administrator

  • This is the inside of the Carburetor Main Body. You can see the assembled Ventury Cluster, New Attaching Hardware, Fuel Bowl, Accelerator Bore, BasePlate and attaching Hardware, Levers, and etc.

    • This is the inside of the Carburetor Main Body. You can see…
    • Views: 1170
    • By: Gallery Administrator

  • The Fuel Pump Anti Reversion Check Ball is placed upon the Air Horn Flange for your inspection. These little items are replaced with New every time. They stop the Accelerator Pump from pushing the fuel back into the Fuel Reservoir.

    • The Fuel Pump Anti Reversion Check Ball is placed upon the A…
    • Views: 1212
    • By: Gallery Administrator

  • Just think that all the weight of the fuel unseats this little steely and lifts it up and allows fuel to fill the Accelerator Pump Bore. Then the Pump pushes down and the pressure on the fuel holds this ball on the seat stopping fuel flow.

    • Just think that all the weight of the fuel unseats this litt…
    • Views: 979
    • By: Gallery Administrator