Gallery logo: Your photos on your web site

 

Album info

  • Title: Terrys 66 Tri Power
  • Description: No description
  • Owner: Gallery Administrator

Random image

Pin Locks

Terrys 66 Tri Power

  • Well here it sits in all it's splendor. This has been a hard item to assemble. It has to be just right. Terry is from New York. You know how those guys are. Come over and beat you if it ain't right.

    • Well here it sits in all it's splendor. This has been…
    • Views: 1340
    • By: Gallery Administrator

  • Well I can not think of anything else I could do. It has the best Ram Air Pan available. Not the flimsy garbage repo. This one has the correct dimples, and rolled carburetor flanges that are indicative of the best available.

    • Well I can not think of anything else I could do. It has th…
    • Views: 1255
    • By: Gallery Administrator

  • You will notice that this is a 65 Fuel line setup. Well guess what? He got a 65 Goat. But this is a 66 intake! Well I guess if it is your car you can make it your way. That is right. Step off the porch and run with the big dogs.

    • You will notice that this is a 65 Fuel line setup. Well gue…
    • Views: 1028
    • By: Gallery Administrator

  • I also speced the 65 thermostat housing onto the intake to make sure that it would fit without any problem. Remember the 64 goes to the left, 65 is straight and 66 goes to the right. Or so they say.

    • I also speced the 65 thermostat housing onto the intake to m…
    • Views: 1001
    • By: Gallery Administrator

  • I was in the process of shooting this little beauty when I noticed that my Flash was not working. Where is the Bunny when you need him. Probably doing the Energizer Commercial. Needless to say the lighting is not optimum for the Digital Camera.

    • I was in the process of shooting this little beauty when I n…
    • Views: 1081
    • By: Gallery Administrator

  • I was looking at the linkage when it hit me. I hope that he has a real good idea of how to install this. There are many adjustments, not to mention the linkage, air fuel mixture, float level, accelerator pump actuation phasing. If it is a metal rod ...

    • I was looking at the linkage when it hit me. I hope that he…
    • Views: 1031
    • By: Gallery Administrator

  • I was very happy that he decided to go with the K and N Oil type Air Filter Elements. They are like the best thing that you could go with. Now he will not have to ever spend money on old worn out paper elements.

    • I was very happy that he decided to go with the K and N Oil…
    • Views: 933
    • By: Gallery Administrator

  • This is the incorrect placement of the Carburetor Gaskets. Do not install them this way. You see the bump in the gasket? It goes to the back. On top of that I also set the carburetor heights with special gaskets. The outer two needed to be raised.

    • This is the incorrect placement of the Carburetor Gaskets.…
    • Views: 944
    • By: Gallery Administrator

  • You will find that I have written the info on the gaskets to keep this from happening. You have no idea how many people do this and end up with a vacuum leak.

    • You will find that I have written the info on the gaskets to…
    • Views: 997
    • By: Gallery Administrator