Gallery logo: Your photos on your web site

 

Album info

Random image

Bobs 389

  • I will also shoot a coat of paint onto the back side of the block to keep the rust away and help it look pretty.  This will be the finishing touch on the detailing of the engine.

    • I will also shoot a coat of paint onto the back side of the…
  • There are two types of nipples to hook into the fuel pump.  You can use a straight or a 90 degree fitting on the pump for the inlet.

    • There are two types of nipples to hook into the fuel pump.…
  • I do not like the straight out fittings on the fuel line side.  I much more prefer to utilize the 90 degree fitting on the outlet side of the pump to connect the carb line to.

    • I do not like the straight out fittings on the fuel line sid…
  • Just picture the bend that the hose would require to connect to the pump if I utilized the straight outlet fitting.  The inlet fitting is going to be your decision.  Upon installation you can decide

    • Just picture the bend that the hose would require to connect…
  • I will install an idiot light temp guage sending unit into the intake for the DYNO run.  Our DYNO has temp guages that monitor the inlet water, outlet water, heater core outlet water temp and even block temps.  The sending unit will not matter to us

    • I will install an idiot light temp guage sending unit into t…
  • Well I need to take off this thermostat housing and get to painting.  I will also seal it on the manifold very solid.  Can't have any leaks on the DYNO

    • Well I need to take off this thermostat housing and get to p…
  • Once more you can see the fuel pump and it's location as far as the outlet and inlet fuel lines.

    • Once more you can see the fuel pump and it's location a…
  • Here is the correct fuel line installed with the 90 degree fitting.  You can see how the fuel line goes straight up and is pretty much non restricted.  That is important.

    • Here is the correct fuel line installed with the 90 degree f…
  • Notice how the Black Thermostat Housing looks much better when it is color coded to match the distributor cap, water pump, and balancer.

    • Notice how the Black Thermostat Housing looks much better wh…