Gallery logo: Your photos on your web site

 

Album info

  • Title: Marcs 71 455HO
  • Description: No description
  • Owner: Gallery Administrator

Random image

20200515 112157

Marcs 71 455HO

  • This is the under the Intake Exhaust Crossover. You can see that it is cast iron as made. The factory just put them in as you see it. Bare and ready to rust. Your choice.

    • This is the under the Intake Exhaust Crossover. You can see…
    • Views: 947
    • By: Gallery Administrator

  • The Choke Stove bolted into this side and it was what worked the divorced choke housing on the side of the Ram Air Three Rochester Carburetor that we need to make you. In your case it would be a 7041270.

    • The Choke Stove bolted into this side and it was what worked…
    • Views: 679
    • By: Gallery Administrator

  • These are the Heat Shields that go over the Exhaust Crossover. Now they are usually painted and as such it just burns off over time and rust also. These are the items that I did for Luis and his 67 Firebird. You can check out his Album on the Intern...

    • These are the Heat Shields that go over the Exhaust Crossove…
    • Views: 712
    • By: Gallery Administrator

  • In this case I felt that it was better to coat them in a Heat Reflective coating to prevent them from rusting and as such ultimately getting damaged.

    • In this case I felt that it was better to coat them in a Hea…
    • Views: 748
    • By: Gallery Administrator

  • Now in the overall scope of things, it is your car. Judges and the like are there to give you a hand up in my opinion. Sure everything should be a certain way but as far as I am concerned your opinion counts the most.

    • Now in the overall scope of things, it is your car. Judges…
    • Views: 666
    • By: Gallery Administrator

  • Therefore if you want them pink with chartruse pokadots so be it. Hopefully it will just be a little bit of a better choice. We can go with the Cerma Chrome, High Temp Black, Flat High Temp Black or any other of the hues.

    • Therefore if you want them pink with chartruse pokadots so b…
    • Views: 769
    • By: Gallery Administrator

  • Here is what his Intake and Carburetor looked like. Now you have to bare in mind that this carburetor is not like the one that you need. It is actually correct for a 67 Firebird. I went to great extents to make it for his car.

    • Here is what his Intake and Carburetor looked like. Now you…
    • Views: 1000
    • By: Gallery Administrator

  • I also modified the Intake Manifold to reflect the numbers that a 67 Firebird would have. The numbers would have to be correct for your 71 455 HO. Do not worry I have one in stock that matches the Heads. Your lucky day.

    • I also modified the Intake Manifold to reflect the numbers t…
    • Views: 902
    • By: Gallery Administrator

  • They pretty much all look the same. They were made for the 1970 Ram Air Four, and all 71 and 72 455 High Output engines only. It is a shame. I happen to like this intake above all others.

    • They pretty much all look the same. They were made for the…
    • Views: 751
    • By: Gallery Administrator