Gallery logo: Your photos on your web site

 

Album info

  • Title: Marcs 71 455HO
  • Description: No description
  • Owner: Gallery Administrator

Random image

Blood Stains

Marcs 71 455HO

  • While in the fitting process before coating begins I take the time to grind and bend the covers so that once they are bolted up they do not rub and scratch each other and damage the coating.

    • While in the fitting process before coating begins I take th…
    • Views: 731
    • By: Gallery Administrator

  • You can see the Chrome Bolts and Nylon Locking Nuts. Talk about a Cubic Money expenditure. They were over $12.50 for the whole lot. That was not counting the spare one that I got him for mistakes incase he lost one.

    • You can see the Chrome Bolts and Nylon Locking Nuts. Talk a…
    • Views: 791
    • By: Gallery Administrator

  • Here is the shot of the correct flange bolts that hold on the Intake Manifold. You will notice that they are not the cheap grade five that the factory installed. These are grade eight. I will take time to upgrade when it makes sense.

    • Here is the shot of the correct flange bolts that hold on th…
    • Views: 777
    • By: Gallery Administrator

  • Here is an Illustrated Parts Breakdown of the Carburetor that you need. I have several of this actual carburetor. The real thing is very expensive. Last core that I pruchased was over $1750.00. Once you have a good core it is pretty much straight f...

    • Here is an Illustrated Parts Breakdown of the Carburetor tha…
    • Views: 832
    • By: Gallery Administrator

  • Here you have a real carburetor just like the drawing illustrates. You will notice that the items that are in the drawing are on the carburetor. I have the brackets that go on the carb and switches.

    • Here you have a real carburetor just like the drawing illust…
    • Views: 819
    • By: Gallery Administrator

  • I also have the wiring, selonoids, bolts and etc needed to make the shaker functional. I am assuming that is what you are intending upon doing.

    • I also have the wiring, selonoids, bolts and etc needed to m…
    • Views: 999
    • By: Gallery Administrator

  • You will need to get in touch with me asap and tell me what all you actually need. I have all the items to put the motor together. I also have all the items necessary to assemble the carburetor.

    • You will need to get in touch with me asap and tell me what…
    • Views: 789
    • By: Gallery Administrator

  • If all is well I should have a good 76 Shaker that we can rely upon to act as a donor to modify into a good 71 Trans Am unit. It will not be 100% correct but it will function fine and look correct from the street and at the shows.

    • If all is well I should have a good 76 Shaker that we can re…
    • Views: 867
    • By: Gallery Administrator

  • This is the question that you are going to have to ask yourself. Are you going to make an attempt to produce a car that is as close to real as possbile or one that is functional.

    • This is the question that you are going to have to ask yours…
    • Views: 829
    • By: Gallery Administrator