Gallery logo: Your photos on your web site

 

Album info

  • Title: Adrians 66 GTO
  • Description: No description
  • Owner: Gallery Administrator

Random image

Here is the shot of the correct choke hot air tubes. It took some time to remove that fitting. I did not want to damage the tubes in the intake manifold.

Adrians 66 GTO

  • Some people think their sites are educational. Well pay attention class. You are in College Now. Pay attention. This old Garbage is just that. You dumpster divers can come by my shop and look in my red metal box for this trash.

    • Some people think their sites are educational. Well pay att…
    • Views: 906
    • By: Gallery Administrator

  • These drums were not slated for the Metal Box. In all actuality there was enough meat to cut them down one or two more times. In this case great. Safety can be compromised when Machining a Drum Brake to thin. In low miles units like this a Machinin...

    • These drums were not slated for the Metal Box. In all actua…
    • Views: 804
    • By: Gallery Administrator

  • Some of the old parts are media blasted to remove all the rust.

    • Some of the old parts are media blasted to remove all the ru…
    • Views: 945
    • By: Gallery Administrator

  • Here is a picture of the weak Spindle and Tie Rod to Spindle Adapter. I could of upgraded all of this to better than stock performance and handling. In this case though Adrian preferred stock. This meant I had to optimize the existing components.

    • Here is a picture of the weak Spindle and Tie Rod to Spindle…
    • Views: 771
    • By: Gallery Administrator

  • Here is the Lower Control Arm sans Bushings. Only one thwack will do ya. Trust me it works great. Only took me forty or so frames to get the swing with the sledge hammer right and not bend the arm at the same time. If you are not that gutsy then yo...

    • Here is the Lower Control Arm sans Bushings. Only one thwac…
    • Views: 783
    • By: Gallery Administrator

  • Here is the other Lower Control Arm. If you will notice the bushings are gone. Just one good whack. Oh see those New Brake Lines and Wheel Cylinders? Bet you wish you knew Hydraulics enough to improve your Stock Braking abiltiy by over 100%.

    • Here is the other Lower Control Arm. If you will notice the…
    • Views: 825
    • By: Gallery Administrator

  • These rear bolts were definately destroyed during the operation. Sorry. Next time turn them around as part of the Heddar install Duh! I had two other bolts flown in from donar cars that had just died in a remote junkyard.

    • These rear bolts were definately destroyed during the operat…
    • Views: 937
    • By: Gallery Administrator

  • This is a overall shot of the Bushings, Sleeves, tools, and etc.

    • This is a overall shot of the Bushings, Sleeves, tools, and…
    • Views: 1027
    • By: Gallery Administrator

  • Before there can be a proper Blasting all the grease has to be removed. If not the Blast Media will ball up. Sand Blasted metal is perfect for paint. Not with greasy slime stuck on it though.

    • Before there can be a proper Blasting all the grease has to…
    • Views: 790
    • By: Gallery Administrator