Gallery logo: Your photos on your web site

 

Album info

  • Title: Adrians 66 GTO
  • Description: No description
  • Owner: Gallery Administrator

Random image

Not is the case. You need an Ocean going Vessel welder to do this job right. Now sure you can make it look nice and perty, but it will not be structural.

Adrians 66 GTO

  • When ever you attempt to engineer in Performance Gains there are many other area's that require upgrade as well. Did you see that puny 5/16 fuel delivery line at the tank?

    • When ever you attempt to engineer in Performance Gains there…
    • Views: 799
    • By: Gallery Administrator

  • Here is a picture of the rear carb once installed. He wants to install these in an "OEM" Fashion. This means putting it back together like the book says it should be. I must admit the man who wrote the book sure lied about a whole lot of stuff he kn...

    • Here is a picture of the rear carb once installed. He wants…
    • Views: 796
    • By: Gallery Administrator

  • This is the Carb and Air Cleaner lid. I took the lower bases and had them coated.

    • This is the Carb and Air Cleaner lid. I took the lower base…
    • Views: 751
    • By: Gallery Administrator

  • Side View of the Carb. I was considering taking pictures of the complete process but got in a hurry. I still do not have the center main body back.

    • Side View of the Carb. I was considering taking pictures of…
    • Views: 777
    • By: Gallery Administrator

  • When I do the carbs right here I can be assured of finishing the job correctly and on time. When I have to ship the body's out there is no telling how long.

    • When I do the carbs right here I can be assured of finishing…
    • Views: 809
    • By: Gallery Administrator

  • I got in a hurry the other day and shipped a set of Tri Power Carbs out to a Company I had heard good things about. I would love to say the name but I shall not. Needless to say I cost myself over $1500.00 in lost carbs. Of course it is not his prob...

    • I got in a hurry the other day and shipped a set of Tri Powe…
    • Views: 967
    • By: Gallery Administrator

  • Well from now on no more sending out items to be worked on when I can do it InHouse. Kinda slows things down but the job definately ends up being done correctly.

    • Well from now on no more sending out items to be worked on w…
    • Views: 779
    • By: Gallery Administrator

  • Funny thing is this. When these were being cut at the Mill they often times had the dimensions set to low. This was not allways the best way and the Firing Order and the numbers ended up looking huge and out of shape.

    • Funny thing is this. When these were being cut at the Mill…
    • Views: 717
    • By: Gallery Administrator

  • I used to wonder about that until I talked to an Engineer that told me the manifold was actually a bit taller and they often did not notice the minor increase so the mill would cut the carb flanges alittle lower and the words would get huge.

    • I used to wonder about that until I talked to an Engineer th…
    • Views: 709
    • By: Gallery Administrator