Gallery logo: Your photos on your web site

 

Album info

  • Title: Steves 65 Tri Power
  • Description: No description
  • Owner: Gallery Administrator

Random image

Shaft Guide

Steves 65 Tri Power

  • Most people forget that these parts are about as old as they are. If you have a hard time gettting up in the morning then these items probably have a hard time working correctly also.

    • Most people forget that these parts are about as old as they…
    • Views: 864
    • By: Gallery Administrator

  • Here is the Ventury Base Plate. You will notice that someone has cut the Main Throttle Shaft. This really was not a good idea. You see there is no outside source for these long Throttle Shafts. Now I have to order a 65 Throttle Body Plate Main Shaft...

    • Here is the Ventury Base Plate. You will notice that someone…
    • Views: 947
    • By: Gallery Administrator

  • Now we get back to that old ugly carburetor. Needless to say even this Accelerator Lever is incorrect for a 65 Tri Power Carburetor. It does not have the correct lever to lift the Float Bowl Vent. That is of course another item that has to be correc...

    • Now we get back to that old ugly carburetor. Needless to sa…
    • Views: 818
    • By: Gallery Administrator

  • You can see how they both look the same from the front. That is the primary reason that most people do not even know that there is a difference. In this case they look the same.

    • You can see how they both look the same from the front. Tha…
    • Views: 818
    • By: Gallery Administrator

  • Now this Air Horn is not correct. There is no Choke Plate, Choke Shaft, or thermostat housing. This was an older carb that did not come with these items. That is where I will utilize the correct top from the donor carb that is coming. Got to do it ...

    • Now this Air Horn is not correct. There is no Choke Plate,…
    • Views: 773
    • By: Gallery Administrator

  • You can see that the Hot Air Bypass valve is missing. Well that is an important thing to notice. The main body on this carburetor will work correctly. That is a blessing because this is one of the last ones that I have and they core out for $250.00 ...

    • You can see that the Hot Air Bypass valve is missing. Well…
    • Views: 853
    • By: Gallery Administrator

  • I will have this Main Body looking OEM NOS. It will take about two weeks in the unplating tank. All the corrosion, plating and etc will be electrchemically sucked off the main body.

    • I will have this Main Body looking OEM NOS. It will take ab…
    • Views: 743
    • By: Gallery Administrator

  • In all actuality this is a very good conditon carb body. I have seen worse. Alot of the whitish appearing stuff you see is actually just a form of salt that occurs when the water evaporated.

    • In all actuality this is a very good conditon carb body. I…
    • Views: 773
    • By: Gallery Administrator

  • Well needless to say I got the parts that I need. In this case that is one carburetor that I can get to work on. It is about ready to go into the plate tank.

    • Well needless to say I got the parts that I need. In this c…
    • Views: 840
    • By: Gallery Administrator