Gallery logo: Your photos on your web site

 

Album info

  • Title: Steves 65 Tri Power
  • Description: No description
  • Owner: Gallery Administrator

Random image

Look at that nice Disk Brake Rotor and Caliper peeking out of the wheel area.

Steves 65 Tri Power

  • Ok now down to the Brass Tri Power Tacts. Here is the deal. The plating on the brackets and the majority of the steel rods and linkage is pertier than the originals. Now in the off the factory assembly line they are a close original. Later of cours...

    • Ok now down to the Brass Tri Power Tacts. Here is the deal.…
    • Views: 613
    • By: Gallery Administrator

  • Notice that the Front and Rear Carb Linkage Rod has the plated clips on the ends. Well I will change these with the OEM appearing Black Phospate ones.

    • Notice that the Front and Rear Carb Linkage Rod has the plat…
    • Views: 712
    • By: Gallery Administrator

  • Second I utilized your reproduction Vacuum Booster Line. It is now positioned in the correct location on the Lower Baseplate of the Front Carb. You will see that it will correctly index with the booster now.

    • Second I utilized your reproduction Vacuum Booster Line. It…
    • Views: 615
    • By: Gallery Administrator

  • Here is the rear view of the Tri Power. You will notice that the back carburetor has the correct non threaded vent base. This is a critical item.

    • Here is the rear view of the Tri Power. You will notice tha…
    • Views: 589
    • By: Gallery Administrator

  • The front of the Tri Power Intake has the OEM Front Water Thermostat Housing. It is an OEM unit and will only add to the correct image of this unit. I have seen many and yours was in great shape.

    • The front of the Tri Power Intake has the OEM Front Water Th…
    • Views: 654
    • By: Gallery Administrator

  • Looking down from the top of the intake setup you cannot notice any differences from the OEM original setup. It looks great and the Tops are very close to OEM original in appearance.

    • Looking down from the top of the intake setup you cannot not…
    • Views: 650
    • By: Gallery Administrator

  • Here is the valley pan all painted and straightened. I have also taken the time to source a new rubber plug for the pcv valve. It will look new and function fine.

    • Here is the valley pan all painted and straightened. I have…
    • Views: 689
    • By: Gallery Administrator

  • The Valley Pan has a new PCV Valve Rubber Groumet installed to prevent Vacuum leaks. This is a critical issue since the hole is quite large. These will often get hard and leak like a screen door.

    • The Valley Pan has a new PCV Valve Rubber Groumet installed…
    • Views: 727
    • By: Gallery Administrator

  • I even took the time to return the bolt holes into the flat dimension that they once were. Not hard to do but it requires a digital hammer to keep you from appling to much force.

    • I even took the time to return the bolt holes into the flat…
    • Views: 734
    • By: Gallery Administrator