Gallery logo: Your photos on your web site

 

Album info

Random image

JIMS 66 389 YS

  • Such impact could break their necks and ruin their lives.  Of course there are other reasons as well.  The Safety Zone in my opinion is the area from the front frame crossmember to the rear crossmember.

    • Such impact could break their necks and ruin their lives. O…
  • In this area I take time to make sure that the frame rails are sufficiently welded up to add structural regidity.  I would rather see the car slide sideways under impact than fold and injure the occupants.

    • In this area I take time to make sure that the frame rails a…
  • Everyone has their own opinions and I am allways open to new ideas.  If any of you out there in the Internet World are Structural Engineers let me know your thoughts.

    • Everyone has their own opinions and I am allways open to new…
  • In the world of welding there is many an idea of how to perform the task correctly.  Some think that the outside of the weld needs to look great.  Now this is going to take some discussion.

    • In the world of welding there is many an idea of how to perf…
  • First of all the top of the weld does not mean anything.  You should be concerned about the bottom of the weld.  That is where the two pieces of metal are joined.  It is also the area where the base metals are supposed to be melted and mixed together.

    • First of all the top of the weld does not mean anything. Yo…
  • When I take my time and lay great looking beads it is because I am focusing very intently upon the base metals and the welding puddle.  Notice the bead on the verticles.  I have to make sure that this area is bonded to perfection.

    • When I take my time and lay great looking beads it is becaus…
  • In other areas where the metal is already well joined it is not all that important to leave perfect welds.  You can charge the customer cubic inch money to give him Hollywood welds in these areas though.

    • In other areas where the metal is already well joined it is…
  • You can also price yourself out of a job.  In most cases the base metals are contaminated by high grease content between the joint.  This will creat poor looking welds when the contaminents outgass.

    • You can also price yourself out of a job. In most cases the…
  • Take another gander at this vert.  You will notice that it looks real nice.  I took an extra amount of time to make sure these were perfect.  That means twice as long as a regular weld bead.

    • Take another gander at this vert. You will notice that it l…