Gallery logo: Your photos on your web site

 

Album info

  • Title: Steves 65 Tri Power
  • Description: No description
  • Owner: Gallery Administrator

Random image

The Front Porch. You can see all kinds of antiques around the place.

Steves 65 Tri Power

  • I used to be able to get these screws in the black phosphate coating. They are no longer available. Now I have to plate them. I am sure in the future I will probably have to make them also.

    • I used to be able to get these screws in the black phosphate…
    • Views: 630
    • By: Gallery Administrator

  • You will notice that the rear carb has the linkage ball installed the wrong way. Not for installation just to show you the wrong way that they can be installed and function fine. It's your choice.

    • You will notice that the rear carb has the linkage ball inst…
    • Views: 804
    • By: Gallery Administrator

  • The Accelerator Pump Rod is bent inwards to allow the clearance for the rod to clear the linkage to the center carb. I will turn the ball around for the final assembly.

    • The Accelerator Pump Rod is bent inwards to allow the cleara…
    • Views: 624
    • By: Gallery Administrator

  • Oh look at that first Accelerator Pump Linkage Bellcrank. It has two holes. Could that be one of the areas that you can customize the fuel delivery rate of the carb?

    • Oh look at that first Accelerator Pump Linkage Bellcrank. I…
    • Views: 765
    • By: Gallery Administrator

  • You will also notice that the front rod is bent different than the rear arm. That is because I take the time to put the right rods in the right spots. Now this does not make a major difference in operation but just visual.

    • You will also notice that the front rod is bent different th…
    • Views: 668
    • By: Gallery Administrator

  • The throttle blades are also plated. Then I take the time to fit them to the bore. I heard of some mental midget telling people that this super critical. Could be?

    • The throttle blades are also plated. Then I take the time t…
    • Views: 637
    • By: Gallery Administrator

  • Wow!!! Look ma they look new. Nice and semi gloss like the original. They also feel as thick as the originals. Now you got nothing to worry about. Much more user friendly.

    • Wow!!! Look ma they look new. Nice and semi gloss like the…
    • Views: 614
    • By: Gallery Administrator

  • I even did the bottoms of them to. Got to keep them looking good upside down also. The plating does add a little bit of dimensional increase to the I.D. of the hole. In most cases this just makes a snug fitting base. Good for keeping dirt out.

    • I even did the bottoms of them to. Got to keep them looking…
    • Views: 666
    • By: Gallery Administrator

  • This is the side of the gaskets that I am going to paint to hide them form the prying eyes at the car shows. Who knows, perhaps they will think that they are OEM spacers to improve Air Fuel Atomization.

    • This is the side of the gaskets that I am going to paint to…
    • Views: 832
    • By: Gallery Administrator